BMP388L BMP390L 24-bit I2C Luftdruck atmosphärischer Druck Höhenmesser Sensor

6,47 

CJMCU-388 BMP388L 24-bit I2C Luftdruck atmosphärischer Druck Höhenmesser Air Atmospheric Pressure Sensor Modul

Lieferzeit: sofort

20 vorrätig

Beschreibung

 

CJMCU-388 BMP388L 24-bit I2C Luftdruck atmosphärischer Druck Höhenmesser Air Atmospheric Pressure Sensor Modul

CJMCU-388 BMP388L 24-bit I2C Atmospheric Pressure Sensor Module © androegg

CJMCU-388 BMP388L 24-bit I2C Atmospheric Pressure Sensor Module © androegg

CJMCU-388 BMP388L 24-bit I2C SPI Atmospheric Pressure Sensor Module © androegg

Das CJMCU-388 I2C Luftdruck- / Höhenmesser- Modul basiert auf dem BMP388L von Bosch.

Das CJMCU-388 verfügt über

  • Messbereich von 300 – 1250 hPA
  • sehr hohe Temperaturstabiltät
  • geringer Abweichnung
  • niedrigem Stromverbrauch (Ruhestrom nur 54 µA)
  • niedrigem Rauschabstand (unter 0,02Pa)

 

Die maximale Abweichung liegt bei unter 0,50 hPa mit einer relativen Genauigkeit von ±0,03 hPa (entspricht 25 cm im Bezug einer Höhenmessung).

Insbesondere zeichnet sich der BMP388L durch seine 12-Monats-Langzeitstabiltät mit nur ± 0,16 hPa/Jahr aus.

Das CMCU-388 Modul unterstützt Spannungsversorgungen von 3,3V bis 5V.

The CJMCU-388 Air Atmospheric Pressure Sensor Module is based on BMP388L Sensor from Bosch.

The CJMCU-388 Module has

  • Measurement range from 300 to 1250 hPA
  • extremely high temperature stability
  • low drift
  • low power consumption (sleep current only 54uA
  • low noise impact (less than 0.02Pa)

 

The maximum absolute accuracy error of the product is less than 0.50 hPa, and the relative accuracy can reach ±0.03 hPa (equivalent to 25cm).

In addition, the long-term stability performance of the new model is far ahead of that of the generation, with a 12-month long-term stability error of only ± 0.16 hPa/year.

The CJMCU388 Module supports 3.3V up to 5V supply voltage.

 

CJMCU-388L Atmospheric Pressure Module Features:

  • Startup time: 2ms
  • Interface mode: I2C
  • ODR accuracy: ±2~±12%
  • Operating voltage: 3.3-5V
  • Absolute accuracy: ±0.50hPa
  • Long-term stability: ±0.16hPa/ year
  • Pressure sensing range: 300~1250 hPa
  • Temperature offset coefficient: ±0.6Pa/K (@900hPa,25-40°C)
  • Working current:
    • Sleep mode (54uA)
    • Normal mode (357~650uA)
  • Relative accuracy: ±0.03hPa(equivalent to 25cm) (@700-1100hPa,25-40°C)
  • I2C address:
    • 0x77 (default address)
    • 0x76 (Optional: SDO pin connected to GND)
  • Operating temperature range: -40℃~+85℃ (full
  • precision measurement can be used at 0℃~+65℃)

Zusätzliche Informationen

CE Konformität

Declaration of Conformity RoHS

Konformitätserklärung RoHS

ManufacturerHersteller

Shenzhen Inventor Electronic Technology Co., Ltd.
uilding 2, Yingfeng Industrial Zone, Tantou Community, Songgang Street, Bao’an, Shenzhen, China,518105
+86-755-2916-1269

EU responsible person
EU verantwortliche Person

Beauty-Point Deutschland GmbH
Markus Hahl (Produktmanagement)
Raiffeisenstraße 2-4
83607 Holzkirchen Germany

Item-ID
Artikelnummer

285543151065-BMP390

Description
Beschreibung

CJMCU-390 BMP390L 24-bit I2C SPI Luftdruck atmosphärischer Druck Höhenmesser Sensor

The product complies with the requirements and provisions of the 2011/65/EU directive.

Das Produkt entspricht den grundlegenden Bestimmungen der Richtlinie 2011/65/EU.

The product does not contain any of the restricted substances in concentrations and applications banned by the Directive 2011/65/EU.

Das Produkt überschreitet keinen Grenzwert der unten aufgeführten Substanzen gemäß der Richtlinie 2011/65/EU.

Substance
Substanz

Concentration
Grenzwert

Substance
Substanz

Concentration
Grenzwert

Lead
Blei

0.1%

Mercury
Quecksilber

0.1%

Hexavalent Chromium
Sechswertiges Chrom

0.1%

PBB (Polybrominated Biphenyls)
Polybromiertes Biphenyl (PBB)

0.1%

PBDE Polybrominated Diphenyl Ethers
PBDE Polybromiertes Diphenylether

0.1%

Cadmium
Cadmium

0.1%

DEHP (Bis (2-Ethylhexl) phthalate)
DEHP(Bis (2-Ethylhexl) Phalat)

0.1%

BBP (Benzyl butyl phthalate)
BBP(Benzylbutylphthalat)

0.1%

DBP (Dibutyl phthalate)
DBP (Dibutylphthalat)

0.1%

DIBP (Diisobutyl phthalate)
DIBP (Diisobutylphthalat)

0.1%

The supplier of the item listed above has informed Beauty-Point Deutschland GmbH that the product is “RoHS Compliant”.

Der Lieferant dieses Produktes hat Beauty-Point Deutschland GmbH bestätigt, dass das oben genannte Produkt „RoHS konform“ ist

Dokumente

Datenblatt

Benutzerhandbuch

Das könnte dir auch gefallen …