USB-C DAPLink STM32 STM32F103C6T6A Programmer

7,07 

USB-C DAPLink STM32 STM32F103C6T6A Programmer

Lieferzeit: sofort

10 vorrätig

Beschreibung

USB-C DAPLink STM32 STM32F103C6T6A Arduino ARM Mbed Cortex-M0 Programmer Downloader Emulator

DAPLink USB-C ARM Cortex Downloader Emulator incl. Cable © androegg

DAPLink USB-C ARM Cortex Downloader Emulator © androegg

USB-C DAPLink Programmer inkl. 4 Stück Dupont Kabel female/female.

Der USB-C DAPLink Cortex-M0 Programmer basiert auf dem STM32F103C6T6A von ST Microelectronics.

Der DAPLink Programmer unterstützt dabei 2 typische Anbindungen

  • SWD Pins auf der Oberseite
  • seriell Pins auf der Unterseite

 

DAPLink dient als Schnittstellen-Firmware und läuft auf einer Hilfs-MCU, die mit dem SWD- oder JTAG-Port der Anwendungs-MCU verbunden ist.

Diese Konfiguration ist auf vielen Entwicklungsplatinen vorbereitet und verfügbar. Der DAPLink erlaubt eine direkte debugg Verbindung zwischen Computer und dem MCU-Debug-Zugriffsport her.

 

USB-C DAPLink Programmer incl. 4 pcs. Dupont wire female/female.

The USB-C DAPLink Cortex-M0 Programmer is based on STM32F103C6T6A from ST-Microelectronics.

The DAPLink Programmer supports 2 Interfaces

  • SWD Pins on top side
  • serial Pins on bottom side

 

DAPLink is an interface firmware and runs on an auxiliary MCU connected to the SWD or JTAG port of the application MCU.

This configuration is available on almost all development boards. It creates a bridge between your development computer and the CPU debug access port.

 

 

DAPLink Programmer Features:

    • based on STM32F103C6T6A
    • 5V power supply over USB
    • USB-C interface
    • virtual com port support
    • incl. 4 Dupont Wire
    • JTAG 10-pin 2.54 pitch connector
      • top side
        • 3V3
        • SWD
        • SCK
        • GND
        • RST
      • bottom side
        • 3V3
        • GND
        • TXD
        • RXD
        • 5V

 

 

Zusätzliche Informationen

Das könnte dir auch gefallen …

Anmelden