Sprache Voice Recorder Set ISD1820

3,78 

Sprache Voice Recorder Set ISD1820

Lieferzeit: sofort

14 vorrätig

Beschreibung

Sprache Voice Recorder Set ISD1820 3,3V inkl. Micro Lautsprecher Speaker Arduino ESP8266 STM32

Voice Recorder Set ISD1820 incl. Speaker and Wire © androegg

Voice Recorder Module ISD1820 incl. Microphone © androegg

Voice Recorder Module ISD1820 © androegg

Voice Recorder Module ISD1820 Set Speaker © androegg

Voice Recorder Module ISD1820 Set Speaker 0.5W © androegg

Voice Recorder Module ISD1820 Set Speaker Wire © androegg

Das Sprache Recorder Set basiert auf dem ISD1820 und erlaubt Sprache aufzuzeichnen als auch wiederzugeben. Je nach Audio Qualität speichert das ISD1820 Modul Sprachsignale mit einer Länge von 8 bis 20 Sekunden Sekunden (10 Sekunden Standard) auf.

Das Sprach Recorder Set umfast

  • ISD1820 Modul inkl. Microphon
  • Lautsprecher 0,5W 8Ω
  • Lautsprecherkabel 2-polig 200 mm

 

Neben der direkten Bedienung mittels den Tastern kann das ISD1820 Modul auch mittels einer MCU, beispielsweise

  • ESP8266
  • ESP32
  • ESP8285
  • STM-32
  • Arduino

ferngesteuert werden.

Hierzu müssen lediglich

  • Pin 3 (REC)
  • Pin 4 (PLAYE)
  • Pin 5 (PLAYL)
    auf HIGH, z.B. mittels GPIO’s auf 3,3V gesetzt werden.

 

Zur Verstärkung des Ausgangssignals kann zusätzlich ein entsprechender Verstärker wie beispielsweise

  • unser LM386 Modul
  • D2283
  • D2322
  • TA7368
  • MC34119
  • usw

(nicht im Lieferumfang enthalten) eingesetzt werden.

 

 

The Voice Record Module Set is based on ISD1820, a multiple‐message record/playback device. It can offers true single‐chip voice recording, no‐volatile storage, and playback capability for 8 to 20 seconds (standard 10 Seconds).

The Voice Recorder Set comes incl.

  • ISD1820 Module incl. Microphone
  • Speaker 0,5W 8Ω
  • Speaker wire 2 core 200 mm

 

This module use is easy to use, direct control by push on board buttons or by Microcontroller such as Arduino, STM32,

  • ESP8266
  • ESP32
  • ESP8285
  • STM-32
  • Arduino
  • and much more

 

Just connect

  • Pin 3 (REC)
  • Pin 4 (PLAYE)
  • Pin 5 (PLAYL)

to 3.3V GPIO’s and set it to HIGH for execute function.

For gaining signal output an Amplifier such as

  • our LM386 Module
  • D2283
  • D2322
  • TA7368
  • MC34119
  • and much more

could be connected to speaker output.

 

 

 

Voice Recorder Set ISD1820 Features:

  • Push‐button interface, playback can be edge or level activated
  • on board microphone
  • 3 on board buttons
  • Automatic power‐down mode
  • On‐chip 8Ω speaker driver
  • 0.5W 8Ω speaker
  • 200 mm 2 core speaker wire
  • Can be controlled manually or by MCU
  • Sample rate and duration changable by replacing a single resistor
    80KΩ 8.0KHz Sample Rate 3.4KHz Bandwith
    8 sec.
    100KΩ 6.4KHz Sample Rate 2.6KHz Bandwith 10 sec. (default)
    120KΩ 5.3KHz Sample Rate 2.3KHz Bandwith 12 sec.
    160KΩ 4.0KHz Sample Rate 1.7KHz Bandwith 16 sec.
    200KΩ 3.2KHz Sample Rate 1.3KHz Bandwith 20 sec.
  • Record up to 20 seconds of audio
  • Dimensions: 37 x 54 mm

Zusätzliche Informationen

Das könnte dir auch gefallen …

Anmelden