OpenLog UART seriell Kartenleser ATmega328 Card Reader 3,3-12V

6,92 

OpenLog UART seriell Kartenleser ATmega328 Card Reader 3,3-12V

Lieferzeit: sofort

37 vorrätig

EAN Code N/A Artikelnummer: 283571900627 Kategorie: Schlagwörter: , , , , ,

Beschreibung

OpenLog UART seriell Kartenleser ATmega328 Card Reader 3,3-12V Arduino ESP8266 Modul

OpenLog serial UART Card Reader Module incl. Pinheader © androegg

OpenLog ATmega328 UART Card Reader Module © androegg

OpenLog ATmega328 UART Card Reader Module Pinout © androegg

Das OpenLog Kartenleser Modul basiert auf dem ATmega328.

Diesbezüglich unterstützt das OpenLog Kartenleser Modul neben der typischen SPI Schnittstelle zusätzlich eine serielle UART Schnittstelle.

Das OpenLog Kartenleser Modul verfügt über

  • ATmega328 16MHz MCU
  • Spannungskonverter
  • UART Daten Status LED
  • SPI Daten Status LED

 

Das OpenLog Kartenleser Modul unterstützt

  • microSD Karten von 64MB bis 32GB
  • FAT16 oder FAT32 Datenformat

 

Basierend auf einer Spannungsversorgung von 3,3V – 12V ist das OpenLog Kartenleser Modul ideal als Datenlogger über eine UART oder SPI Schnittstelle.

Bedingt durch seine geringe Stromaufnahme von nur 20-23 mA (Schreibmodus) eignet sich das OpenLog Kartenleser Modul insbesondere für mobile und batteriebetriebene Anwednungen.

The OpenLog Card Reader Module is based on ATmega328.

Besides the typical SPI Interface the OpenLog Card Reader Module supports also serial UART Interface.

The OpenLog Card Reader Module has an integrated

  • ATmega328 16MHz MCU
  • Spannungskonverter
  • UART Data State LED
  • SPI Data State LED

 

The OpenLog Card Reader Module supports

  • microSD Cards from 64MB up to 32GB
  • FAT16 or FAT32 Data Format

 

Based on the 3.3 to 12V working voltage the OpenLog Card Reader Module is perfect for Data Logger Applications thru UART or SPI Interface.

The OpenLog’s Card Reader current draw is only 20mA to 23mA when writing to a microSD.

OpenLog Card Reader Features:

    • supports 3.3V up to 12V power supply (3.3V to 5V recommended)
    • low power consumption 20-23mA Active Writing Current Draw (typ.)
    • Log to low-cost microSD FAT16/32 cards up to 64GB
    • Simple command interface
    • Configurable baud rates (up to 115200bps)
    • Preprogrammed ATmega328 and bootloader
    • 4 SPI pogo pins
    • Two status LEDs
    • indicate writing status 2mA idle, 6mA at maximum recording rate

 

Zusätzliche Informationen

Das könnte dir auch gefallen …

Anmelden