IoT WLan WiFi RGB LED Controller WS2812 Set

5,98 

IoT WLan WiFi RGB LED Controller WS2812 + ESP01 + Kabel + Widerstände kompl.

Lieferzeit: sofort

20 vorrätig

Beschreibung

IoT WLan WiFi RGB LED Controller WS2812 + ESP01 + Kabel + Widerstände kompl.

AI Thinker ESP-01 WS2812 WiFi RGB LED Set © androegg

WS2812 ESP8266 ESP-01 Controller Module © androegg

Original AI Thinker ESP8266 ESP-01 © androegg

ESP8266 ESP-01 Pins 2 mm Pitch © androegg

200 mm 3 core wire © androegg

Resistors © androegg

Das WS2812 ESP-01 Set beinhaltet:

  • 1 Stück ESP8266 ESP-01
  • 1 Stück WS2812 LED Controler Modul
  • 1 Stück Anschlusskabel inkl. Steckverbinder 3-polis ca. 200 mm
  • 3 Stück Widerstände 10KΩ (z.B. für Flash Modus)

 

Das WS2812 ESP-01 Set erlaubt die einfache Anbindung des WS2812 RGB LED Controler in ein WLan Netzwerk. Das WS2812 Modul verfügt über

  • passenden Anschluss für den ESP-01
  • Spannungskonverter für Versorgungsspannungen zwischen 3,7V -5 V
  • Power LED
  • RST Taster
  • 3-poligen LED Anschluss

 

Die notwendigen Klassen / Module für den WS2812 sind für verschiedene SDK’s wie beispielsweise

  • Espressif
  • NodeMCU
  • Arduino
  • usw.

verfügbar.

 

Bei dem aktuellen ESP-01 (schwarze Platine) wurde unter anderem der SPI Flash Größe, im Vergleich zum Vorgänger (ESP-01 mit blauer Platine) verdoppelt.

Zur Herstellung einer seriellen Verbindung empfehlen wir unseren CH340 USB TTL Konverter (im Set nicht enthalten).

The WS2812 ESP-01 Set is incl.

  • 1 piece ESP8266 ESP-01
  • 1 pieces WS2812 LED Controller Module
  • 1 piece 3 core wire incl. connector
  • 3 pcs. Resistor 10KΩ (for flashing firmware)

WS2812 Module features:

  • ESP-01 Socket
  • Power Converter, supports 3.7V – 5V power supply
  • Power LED
  • RST Button
  • 3 Pin LED Socket Connector

 

Required software modules are available for different SDK’s such as

  • Espressif
  • NodeMCU
  • Arduino
  •  and much more

 

 

Compared to old Version of ESP-01 (blue Board) acutual Version of ESP-01 (black Board) has double Size of ESP Flash Size.

For serial connection we recommend our CH340 USB TTL Converter (not included).

 

ESP-01 Features:

  • CPU / MPU:
    • Frequency: 80 / 160 MHz.
    • Risk: 32-bit
    • Instruction Ram: 64 Kb
    • Data Ram: 96 Kb
  • SPI Flash:
    • Flash memory: 8Mb
    • clock frequency: 120 MHz.
    • Page program: up to 256 bytes in 0.7ms (TYP)
    • Sector erase: 512Kb in 150ms
    • Chip erase: 10s
    • High Speed Clock Frequency:
    • -120MHz for fast read with 30PF load
    • -Dual I/O Data transfer up to 180Mbits/s
    • -Quad I/O Data transfer up to 360Mbits/s
    • Deep power-down: 5μA (MAX)
    • Write Cycles: > 100,000 write cycles per sector
      Data retention: > 20 Years
  • 802.11 b/g/n protocol
  • supports Wi-Fi Direct (P2P)
  • soft-AP Integrated TCP/IP protocol stack
  • integrated PCB Antenna
  • +19.5 dBm output power in 802.11b mode
  • Power down leakage current of < 5uA
  • Integrated low power 32-bit MCU
  • supported Interface
    • SDIO 2.0
    • SPI
    • UART
    • STBC
    • MIMO
  • A-MPDU & A-MSDU aggregation & 0.4μs guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)

 

Zusätzliche Informationen

Das könnte dir auch gefallen …

Anmelden