IoT WLan WiFi DS18B20 Temperatur Sensor Modul Set

6,38 

IoT WLan WiFi DS18B20 Temperatur Sensor Modul + ESP01 + Widerstände kompl.

Lieferzeit: sofort

35 vorrätig

Beschreibung

IoT WLan WiFi DS18B20 Temperatur Sensor Modul + ESP01

AI Thinker ESP-01 DS18B20 Temperature Sensor Set © androegg

AI Thinker ESP-01 DS18B20 Temperature Sensor Module © androegg

DS18B20 ESP8266 ESP-01 Sensor Module © androegg

Original AI Thinker ESP8266 ESP-01 © androegg

ESP8266 ESP-01 Pins 2 mm Pitch © androegg

Das DS18B20 ESP-01 Set beinhaltet:

  • 1 Stück ESP8266 ESP-01
  • 1 Stück DS18B20 Temperatur Sensor Modul

 

Das DS18B20 ESP-01 Set erlaubt die einfache Anbindung des DS18B20 Temperatur Sensors in ein WLan Netzwerk. Das DS18B20 Modul verfügt über

  • passenden Anschluss für den ESP-01
  • Spannungskonverter für Versorgungsspannungen zwischen 3,7V -5 V
  • Power LED
  • RST Taster
  • DS18B20 Temperatur Sensor
  • Spannungsversorgung mittels 2 Pin Steckleiste 2,54 mm Pitch

 

Der DS18B20 wird mittels 1-wire betrieben und ist für verschiedene SDK’s wie beispielsweise

  • Espressif
  • NodeMCU
  • Arduino
  • usw.

verfügbar.

Im Vergleich zum ESP-01 DHT11 Modul verfügt das DS18B20 Modul über

  • Messtoleranz ±0.5°C
  • Messbereich -10°C bis +85°C
  • Auflösung von 9 bis 12 bit

 

Bei dem aktuellen ESP-01 (schwarze Platine) wurde unter anderem der SPI Flash Größe, im Vergleich zum Vorgänger (ESP-01 mit blauer Platine) verdoppelt.

Zur Herstellung einer seriellen Verbindung empfehlen wir unseren CH340 USB TTL Konverter (im Set nicht enthalten).

The DS18B20 ESP-01 Set is incl.

  • 1 piece ESP8266 ESP-01
  • 1 pieces DS18B20 Temperature Sensor Module

DS18B20 Module features:

  • ESP-01 Socket
  • Power Converter, supports 3.7V – 5V power supply
  • Power LED
  • RST Button
  • DS18B20 Temperature Sensor
  • 2 Pin VCC Connector 2.54 mm Pitch

 

The DS18B20 Module requires 1-wire connection, software modules are available for different SDK’s such as

  • Espressif
  • NodeMCU
  • Arduino
  •  and much more

 

Compared to the ESP-01 DHT11 Module the DS18B20 features

  •  tolerance ±0.5°C
  • measuring range -10°C to +85°C
  • Resolution 9 to 12 bit

 

Compared to old Version of ESP-01 (blue Board) acutual Version of ESP-01 (black Board) has double Size of ESP Flash Size.

For serial connection we recommend our CH340 USB TTL Converter (not included).

 

ESP-01 Features:

  • CPU / MPU:
    • Frequency: 80 / 160 MHz.
    • Risk: 32-bit
    • Instruction Ram: 64 Kb
    • Data Ram: 96 Kb
  • SPI Flash:
    • Flash memory: 8Mb
    • clock frequency: 120 MHz.
    • Page program: up to 256 bytes in 0.7ms (TYP)
    • Sector erase: 512Kb in 150ms
    • Chip erase: 10s
    • High Speed Clock Frequency:
    • -120MHz for fast read with 30PF load
    • -Dual I/O Data transfer up to 180Mbits/s
    • -Quad I/O Data transfer up to 360Mbits/s
    • Deep power-down: 5μA (MAX)
    • Write Cycles: > 100,000 write cycles per sector
      Data retention: > 20 Years
  • 802.11 b/g/n protocol
  • supports Wi-Fi Direct (P2P)
  • soft-AP Integrated TCP/IP protocol stack
  • integrated PCB Antenna
  • +19.5 dBm output power in 802.11b mode
  • Power down leakage current of < 5uA
  • Integrated low power 32-bit MCU
  • supported Interface
    • SDIO 2.0
    • SPI
    • UART
    • STBC
    • MIMO
  • A-MPDU & A-MSDU aggregation & 0.4μs guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)

 

Zusätzliche Informationen

Das könnte dir auch gefallen …

Anmelden