ESP32-C3 LUATOS LuatIDE Micropython USB-C Entwickler 4MB Flash IPS80x160 ST7735 Display white Board

ESP32-C3 LUATOS LUA Tools Micropython Development Boards © androegg

ESP32-C3 LUATOS Development Display Extension Board © androegg

ESP32-C3 LUATOS LUA Tools Boards wie folgt verfügbar:

• 1 Stück ESP32-C3 LUATOS CH343 USB TTL Entwicklerboard, inkl. 2 Stück Pinleisten
• 1 Stück ESP32-C3 LUATOS Entwicklerboard, inkl. 2 Stück Pinleisten
• 1 Stück IPS80x160 weisses Display Board Erweiterung, , inkl. 2 Stück Stecksockel

Die ESP32 LUATOS LUA Tools Entwicklerboard basieren auf dem ESP32 C3 Core von Esspressif in Kombination mit 4MB Quad SPI Flash. Das ESP32 LUATOS Enwticklerboard ist dabei

• mit integriertem CH343 USB TTL Konverter
  sowie
  zur direkten Verwendung der LuatIDE
• ohne USB TTL Konverter, zum Betrieb mite einem externen USB TTL Konverter, typischerweise zur Verwendung von Luatools (keine Unterstützung der LuatIDE)

verfügbar.

ESP32-C3 Lua Micropython Entwicklerboard

Die generelle Spannungsversorgung erfolgt dabei über eine integrierte USB-C Schnittstelle.

Das ESP32-C3 LUATOS LUA Tools Entwicklerboard unterstützt

• 802.11 b/g/n Standard
• HT40 WLan Transceiver
• Bluetooth bis 4.2
• Takfrequenz 160MHz
• SRAM 512kBytes
• 4MB 32Mbit SPI Flash
• 32 Pin
• unterstützte Schnittstellen
  SPI SD Karte,
  UART,
  SPI,
  SDIO,
  I2C,
  LED PWM,
  Motor PWM,
  I2S,
  IR,
  pulse counter,
  GPIO, capacitive touch sensor,
  ADC 12-bit,
  DAC,
  Two-Wire Automotive Interface (TWAI®), compatible with ISO11898-1 (CAN Specification 2.0)

ESP32-C3 Display Erweiterung

Passend für für die ESP32 LUATOS LUA Tools Entwicklerboards ist das IPS80x160 0,96 inch Display Erweiterungsboard verfügbar. Das IPS80x160 Display Board verfügt über:

• integrierten ST7735S Treiber IC
• Joystick Button zur Benutzereingabe
• passende Stecksockel für ESP32 LUATOS

Entwicklerboards

• 1 pcs. ESP32-C3 LUATOS CH343 USB TTL Development Board, incl. 2pcs. Pinheader
• 1 pcs. ESP32-C3 LUATOS Development Board, incl. 2pcs. Pinheader
• 1pcs. IPS80x160 white Display Extension Board, incl. 2pcs. Pinsocket

TheESP32 LUATOS LUA Tools are based on ESP32 C3 from Esspressif in combination with a 4MB Quad SPI Flash. The ESP32 LUATOS Development Board is available

• with integrated CH343 USB TTL Converter, supports direct use of LautIDE
• without USB TTL Converter for external USB TTL Converter, LuatIDE not supported

ESP32-C3 Lua Micropython development boarD

The 5V main power supply is supported thru USB-C Socket.

The ESP32-C3 LUATOS LUA Tools Boards supports

• 802.11 b/g/n Standard
• HT40 WLan Transceiver
• Bluetooth up to 4.2
• Frequency 160MHz
• SRAM 512kBytes
• 4MB 32Mbit SPI Flash
• 32 Pin
• supported Interfaces
  SPI SD Karte,
  UART,
  SPI,
  SDIO,
  I2C,
  LED PWM,
  Motor PWM,
  I2S,
  IR,
  pulse counter,
  GPIO, capacitive touch sensor,
  ADC 12-bit,
  DAC,
  Two-Wire Automotive Interface (TWAI®), compatible with ISO11898-1 (CAN Specification 2.0)

ESP32-C3 Display Extension

The 0.96 inch IPS80x160 provides:

• integrated ST7735S Driver IC
• Joystick Button for User input
• Pinsockets for ESP32 LUATOS

Development Boards

ESP32 LUATOS development board Features:

• small form factor
• Length 51mm
• Width 21 mm
• 5V Power Supply thru USB-C Connector
• 2 Versions available

• with CH343 USB TTL Converter on board
• without TTO Converter
• CPU / MPU:
  Frequency: up to 240 MHz. based on Tensilica LX6 microcontroller with 600 DMIPS
  up to 600 DMIPS448 KByte ROM size
  520 KByte SRAM size
• 4MB Quad SPI Flash:
  Flash memory: 32Mbit
  clock frequency: 75 MHz.
  Page program: up to 256 bytes in 0.64ms (TYP) Sector erase: 512Kb in 0.6s
  Bulk erase: 17 – 23 s
  Hardware write protection: protected area size defined by nonvolatile bits BP0, BP1, BP2
  Deep power-down: 1μA (TYP)
  Write Cycles: > 100,000 write cycles per sector Data retention: > 20 Years
• 802.11 b/g/n/e/i protocol
• supports Wi-Fi Direct (P2P)
• soft-AP Integrated TCP/IP protocol stack
• 802.11 n (2.4 GHz), up to 150 Mbps
• 802.11 e: QoS for wireless multimedia technology
• Block ACK
• Fragmentation and defragmentation
• Automatic Beacon monitoring/scanning
• 802.11 i security features: pre-authentication and TSN
• Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
• Infrastructure BSS Station mode/SoftAP mode Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
• UMA compliant and certified
• Antenna diversity and selection
• Compliant with Bluetooth v4.2 BR/EDR and BLE specification
• deep sleep current of < 2.5uA
• Class-1, class-2 and class-3 transmitter without external power amplifier
• Enhanced power control
• +10 dBm transmitting power
• NZIF receiver with -98 dBm sensitivity
• Adaptive Frequency Hopping (AFH)
• Standard HCI based on SDIO/SPI/UART
• High speed UART HCI, up to 4 Mbps
• BT 4.2 controller and host stack
• Service Discover Protocol (SDP)
• General Access Profile (GAP)
• Security Manage Protocol (SMP)
• Bluetooth Low Energy (BLE)
• ATT/GATT
• HID
• All GATT-based profile supported
• SPP-Like GATT-based profile
• BLE Beacon
• A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
• CVSD and SBC for audio codec
• Bluetooth Piconet and Scatternet