Bluetooth 4.0 to RS232 UART Modul JDY-08

7,37 

Bluetooth 4.0 to RS232 UART Modul JDY-08 HM-10 CC2541 iBeacon WeChat AT Firmware

Lieferzeit: sofort

20 vorrätig

Beschreibung

Bluetooth 4.0 to RS232 UART Modul JDY-08 HM-10 CC2541 iBeacon WeChat AT Firmware

Low power consumption Bluetooth to RS232 UART Module © androegg

JDY-08 Bluetooth 4.0 Transceiver to RS232 UART Module © androegg

JDY-08 Bluetooth 4.0 Transceiver Module Pinout © androegg

Das Bluetooth to RS232 UART Modul basiert auf dem CC2541 von Texas Instruments.

Das Bluetooth to RS232 UART Modul verfügt über einen integrierten Spannungskonverter und erlaubt eine Versorgungsspannung von 3,6V bis 6V.

Neben der direkten Bluetooth to RS232 UART Konvertierung unterstützt das JDY-08 Bluetooth 4.0 Modul eine Vielzahl von Funktionen

  • WeChat pass
  • unterstützt AirSync
  • APP transparenter Übertragungsmodus (auch für iOS und Android)
  • iBeacon
  • Host und Slave Modus
  • RTC Funktionen

 

Zusätzlich verfügt das JDY-08 Bluetooth 4.0 Modul über

  • PWM
  • GPIO
  • I2C

Schnittstellen (nicht auf die Pinleiste ausgeführt).

Das JDY-08 entspricht dem BLE Standard (Bluetooth Low Energy) und benötigt weniger Energie als herkömmliche Bluetooth Module wie beispielsweise HM-11, HC-05.

Die jeweiligen Funktionen des JDY-08 Bluetooth 4.0 Modul lassen sich direkt, mittels einfachen AT Befehlen steuern.

 

The Bluetooth to RS232 UART Module is based on CC2541 IC from Texas Instruments.

The Bluetooth to RS232 UART Module has an integrated Voltage Converter and supports a power supply from 3.6V to 6.0V.

Besides the Bluetooth to UART bridge, the JDY-08 Bluetooth Transceiver Module supports also

  • WeChat pass
  • Air Sync
  • APP transparent transmission mode (also iOS and Android compatible)
  • iBeacon
  • Host and Slave Mode
  • RTC Functions

 

Additionally the JDY-08 Transceiver Modul supports also

  • PWM
  • GPIO
  • I2C

Interfaces (not connected to Pin Header).

The JDY-08 is a low power consumption Transceiver Module its based on BLE Standard (Bluetooth Low Energy).

The Interfaces and Functions are controlled thru simple AT Commands.

Bluetooth to RS232 UART Module Features:

  • 3.6V – 6.0V Working Voltage
  • 6 Pin Connector
    PWRC
    VCC
    GND
    TXD
    RXD
    STAT
  • Ultra-low standby power consumption 400uA ~ 800uA
  • Ultra-long connection distance up to 100 ft / 60 m
  • Fast reaction speed 0.4 seconds
  • For Apple, Android
  • Receive no byte limit, up to 6K Bytes / sec.
  • I2C Interface
  • UART Interface (connected to Pin Header)
  • PWM
  • GPIO

 

Zusätzliche Informationen

Das könnte dir auch gefallen …

Anmelden