ASAIR HDS10 Kondensations- Feuchtigkeits- Condensation- Humidity- Sensor Set

2,64 

ASAIR HDS10 Kondensations- Feuchtigkeits- Condensation- Humidity- 3,3V 5V Sensor Set

Versand kostenlos innerhalb Deutschland

Lieferzeit: sofort

Beschreibung

ASAIR HDS10 Kondensations- Feuchtigkeits- Condensation- Humidity- Sensor Set analog

ASAIR HDS10 condensation humidity sensor Set incl. resistor / voltage dividier © androegg

ASAIR HDS10 condensation humidity sensor © androegg

ASAIR HDS10 condensation humidity sensor © androegg

ASAIR HDS10 condensation humidity sensor schematic © androegg

HDS10 Kondensations- Feuchtigkeits- Sensor von ASAIR wie folgt verfügbar:

  • 5V Sensorset HDS10 bestehend aus (VCC 0,72 V)
  • 1 Stück HDS10 Sensor
  • 1 Stück 300KΩ R1 Widerstand
  • 1 Stück 51KΩ R2 Widerstand

 

  • 3,3V Sensorset HDS10 bestehend aus
    (VCC 0,67V)

    • 1 Stück HDS10 Sensor
    • 1 Stück 200KΩ R1 Widerstand
    • 1 Stück 51KΩ R2 Widerstand

 

Der ASAIR HDS10 ist ein analoger Feuchtigkeitssensor und erlaubt eine maximale Spannungsversorgung von 0,8V. Mittels den jeweiligen Widerständen kann ein enstprechender Spannungsteiler hergestellt werden (siehe Schema).

Der HDS10 fungiert als Widerstand welcher über einen Analog Digital Konverter einer entsprechenden MCU ausgewertet wird.

Der HDS10 erlaubt die Bestimmung von 1 bis 100% relative Feuchtigkeit, bzw. Bestimmung einer Kondensation- / Taubildung im Bereich von 94-100% liegt.

The ASAIR HDS10 condensation humidity sensor is available as follows:

  • 5V HDS10 sensor kit incl. (VCC 0.72 V)
  • 1 pcs. HDS10 sensor
  • 1 pcs. 300KΩ R1 resistor
  • 1 pcs. 51KΩ R2 resistor

 

  • 3.3V HDS10 sensor kit incl. (VCC 0.67 V)
  • 1 pcs. HDS10 sensor
  • 1 pcs. 200KΩ R1 resistor
  • 1 pcs. 51KΩ R2 resistor

The ASAIR HDS10 is an analog humidity sensor and allows a maximum supply voltage of 0.8V. A corresponding voltage divider can be created using the appropriate resistors (see diagram).

 

The HDS10 acts as a resistor that is evaluated via an analog-to-digital converter of a corresponding MCU.

The HDS10 allows the determination of relative humidity from 1 to 100%, or the determination of condensation / dew formation in the range of 94-100%.

ASAIR HDS10 Sensor Features:

  • Supply voltage: 0.8V DC (safety voltage)
  • Operating temperature range: 1 ~ 80°C
  • Humidity range: 1 ~ 100% RH
  • Condensation test range: 94 ~ 100% RH
  • Sensor dimension:
    • width 5mm
    • length 7mm
  • Dimensions:
    • width 5mm
    • length 15mm
    • height 0,65mm

Zusätzliche Informationen

Sensor Set

HDS10 3.3V Set, HDS10 5V Set

CE Konformität

Declaration of Conformity RoHS

Konformitätserklärung RoHS

ManufacturerHersteller

Shenzhen Chipskey Technology CO.,LTD.
16H Block A,Duhui 100 Building,Huaqiangbei, Futian, Shenzhen, Guangdong, China 518031
+86-137-15126889

EU responsible person
EU verantwortliche Person

Beauty-Point Deutschland GmbH
Markus Hahl (Produktmanagement)
Raiffeisenstraße 2-4
83607 Holzkirchen Germany

Item-ID
Artikelnummer

284908998461-AHT15

Description
Beschreibung

AOSONG ASAIR AHT15 Temperatur -40-+85°C Luftfeuchte Sensor

The product complies with the requirements and provisions of the 2011/65/EU directive.

Das Produkt entspricht den grundlegenden Bestimmungen der Richtlinie 2011/65/EU.

The product does not contain any of the restricted substances in concentrations and applications banned by the Directive 2011/65/EU.

Das Produkt überschreitet keinen Grenzwert der unten aufgeführten Substanzen gemäß der Richtlinie 2011/65/EU.

Substance
Substanz

Concentration
Grenzwert

Substance
Substanz

Concentration
Grenzwert

Lead
Blei

0.1%

Mercury
Quecksilber

0.1%

Hexavalent Chromium
Sechswertiges Chrom

0.1%

PBB (Polybrominated Biphenyls)
Polybromiertes Biphenyl (PBB)

0.1%

PBDE Polybrominated Diphenyl Ethers
PBDE Polybromiertes Diphenylether

0.1%

Cadmium
Cadmium

0.1%

DEHP (Bis (2-Ethylhexl) phthalate)
DEHP(Bis (2-Ethylhexl) Phalat)

0.1%

BBP (Benzyl butyl phthalate)
BBP(Benzylbutylphthalat)

0.1%

DBP (Dibutyl phthalate)
DBP (Dibutylphthalat)

0.1%

DIBP (Diisobutyl phthalate)
DIBP (Diisobutylphthalat)

0.1%

The supplier of the item listed above has informed Beauty-Point Deutschland GmbH that the product is “RoHS Compliant”.

Der Lieferant dieses Produktes hat Beauty-Point Deutschland GmbH bestätigt, dass das oben genannte Produkt „RoHS konform“ ist

Dokumente

Datenblatt

Benutzerhandbuch

Das könnte dir auch gefallen …