AM2301 DHT21 Temperatur Luftfeuchtigkeit Humidity 1-wire Sensor

6,89 

AM2301 DHT21 Temperatur Luftdruck Luftfeuchtigkeit Humidity 1-wire Sensor

Lieferzeit: sofort

54 vorrätig

Beschreibung

AM2301 DHT21 Temperatur Luftfeuchtigkeit Humidity 1-wire Sensor ESP8266 Arduino

AM2301 Temperature and Humdity Sensor incl. Pullup Resistor © androegg

AM2301 DHT21Temperature and Humdity Sensor © androegg

Der Lieferumfang des AMS2301 Sensor umfasst

  • 1 Stück AM2301 / DHT-21 Sensor
  • 1 Stück Pullup 4K7 Widerstand (wird zwischen VCC / rot und Signal /gelb geschaltet)

 

Der AM2301 Sensor Modul erlaubt die Erfassung von

  • Temperaturen von -40°C bis +80°C
  • Luftfeuchtigkeit von 0% bis 100%

 

Der AM2301 Sensor verfügt eine 1-wire / 1-Draht Bus Schnittstelle (benötigt einen Pullup Widerstand im Liefrumfang enthalten) und unterstützt eine Vielzahl von verschiedenen Modulen wie.

  • ESP8266
  • ESP32
  • ESP8285
  • Arduino
  • Raspberry Pi

 

 

AM2301 Anschluss

  • rot VCC + 3,3 bis 5V+
  • schwarz GND – 3,3-5V
  • gelb Signal GPIO / MCU Signal Pin, sowie Pullup Widerstand auf VCC

Der AM2301 Sensor verfügt über eine geringe Messabweichung

  • < ± 1°C
  • ±3% (max. 5%) im Bereich von 0% bis 100% Luftfeuchtigkeit

AM2301/DHT-21 incl.

  • 1 pcs. AM2301 Sensor
  • 1 pcs. 4K7 Pullup Resistor (connected between VCC / red and Signal / yellow)

 

The AM2301 Sensor Module enables

  • Temperature: -40 to 80°C
  • Humidity: 0 to 100%

measurements

The AM2301 is based on 1-wire Databus (requires a Pullup Resistor, included) and supports a wide range of MCU’s sucha as

  • ESP8266
  • ESP32
  • ESP8285
  • Arduino
  • Raspberry Pi

AM2301 Connection / Wireing

  • red VCC + 3.3V to 5V
  • black GND – 3.3V to 5V
  • yellow Signal to GPIO / MCU Signal Pin and Pullup Resistor connected to VCC

 

The has a high Accuracy

  • < ±1°C
  • humidity over the range of 0 to 100% with an accuracy of ±3% (max.5%)

AM2301 DHT-21 Sensor Features:

  • 3.3 – 5V Input Voltage
  • 1-wire / single bus interface
  • Measurement range
    • Temperature: -40 to 80°C
    • Humidity: 0 to 100%
  • Resolution / Sensitivity
    • temperature 0.1 °C
    • humidity 0.1% RH
  • Repeatability
    • humidity +-1%RH
    • temperature +-0.2Celsius
  • Humidity hysteresis +-0.3%RH
  • Sensing period Average 2s
  • Sensing element Polymer humidity capacitor

Zusätzliche Informationen

Das könnte dir auch gefallen …

Anmelden