2 Stück PCF8574P oder PCF8574AP I2C I/O Bus Expander DIP16 IC

4,24 

2 Stück PCF8574P oder PCF8574AP I2C I/O Bus Expander DIP16 IC Arduino ESP8266 Erweiterung

Lieferzeit: sofort

Beschreibung

2 Stück PCF8574P oder PCF8574AP I2C I/O Bus Expander DIP16 IC Arduino ESP8266 Erweiterung

PCF8574P PCF8574AP I2C IO Expander DIP-16 IC © androegg

our professional IC Shipment method © androegg

Der PCF8574 I2C IO Bus Expander eignet sich hervorragend zur Erweiterungen von digitalen Eingangs- und Ausgangssignalen z.B. für MCU’s wie

  •  Arduino
  • STM32
  • STC
  • ESP8285
  • ESP8266
  • ESP32
  • usw.

 

Der PCF8574 DIP16 IC ist in folgenden Ausführunegn verfügbar:

  •  2 Stück PCF8574P DIP16 IC unterstützt I2C adressen von 0x20 bis 0x27
  • 2 Stück PCF8574AP DIP16 IC unterstützt I2C adressen von 0x38 bis 0x3F
  • PCF8574 Set bestehend aus
    1 Stück PCF8574P DIP-16 IC

    1 Stück PCF8574AP DIP-16 IC

 

 

Unser Versand erfolgt

  •  SCHNELL, als Briefsendung (nicht als Warensendung)
  • ESD geschützt, eingeschweißt in ESD Folie
  • geschützte Pins, durch Schaumstoff Polsterung
  • im Versandkarton, nicht lose im Luftpolsterkuvert

 

PCF8574 I2C Bus Expander is perfect to expand digital Outputs and Inputs for example MCU’s

  • Arduino
  • STM32
  • STC
  • ESP8285
  • ESP8266
  • ESP32
  • etc.

 

The PCF8574 DIP16 IC is available in 3 versions

  •  2 pcs.PCF8574P DIP16 IC supports I2C adresses from 0x20 up to 0x27
  • 2 pcs.CF8574AP DIP16 IC supports I2C adresses from 0x38 up to 0x3F
  • PCF8574 Set incl.
    1 pcs. PCF8574P DIP-16 IC

    1 pcs. PCF8574AP DIP-16 IC

Our shipment is

  •  FAST, registered mail(not Economy Shipping)
  • ESD protected, shrink wrapped in ESD Foil
  • PROTECTED Pins, foam cushioning
  • SAVE in cardboard box, not unprotected in a air cushion enveleope

PCF8574 I2C IO Expander IC Features:

  • I 2C-bus to parallel port expander
  • 100 kHz I2C-bus interface (Standard-mode I2C-bus)
  • Operating supply voltage 2.5 V to 6 V with non-overvoltage tolerant I/O held to VDD with 100µA current source
  • 8-bit remote I/O pins that default to inputs at power-up
  • Latched outputs directly drive LEDs
  • Total package sink capability of 80 mA
  • Active LOW open-drain interrupt output
  • Eight programmable slave addresses using three address pins
  • Low standby current (2.5 µA typical)
  • -40 °C to +85 °C operation
  • ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101

Zusätzliche Informationen

Version

PCF8574P+PCF8574AP, 2xPCF8574P, 2xPCF8574AP

Das könnte dir auch gefallen …

Anmelden