Bluetooth 4.0 Modul JDY-08 HM-10 CC2541

5,38 

Bluetooth 4.0 Modul JDY-08 HM-10 CC2541 iBeacon WeChat ADC GPIO PWM RTC AT Firmware

Lieferzeit: sofort

47 vorrätig

Beschreibung

Bluetooth 4.0 Modul JDY-08 HM-10 CC2541 iBeacon WeChat ADC GPIO PWM RTC AT Firmware

Low power consumption BLE Module JDY-08 © androegg

JDY-08 Bluetooth 4.0 Transceiver Module © androegg

JDY-08 Bluetooth 4.0 Transceiver Module Pinout © androegg

Das JDY-08 Bluetooth 4.0 Modul vereint eine Vielzahl von Funktionen

  • WeChat pass
  • unterstützt AirSync
  • APP transparenter Übertragungsmodus (auch für iOS und Android)
  • iBeacon
  • Host und Slave Modus
  • RTC Funktionen

 

Zusätzlich verfügt das JDY-08 Bluetooth 4.0 Modul über

  • PWM
  • GPIO
  • I2C
  • UART

Schnittstellen.

Das JDY-08 entspricht dem BLE Standard (Bluetooth Low Energy) und benötigt weniger Energie als herkömmliche Bluetooth Module wie beispielsweise HM-11, HC-05.

Die jeweiligen Funktionen des JDY-08 Bluetooth 4.0 Modul lassen sich direkt, mittels einfachen AT Befehlen steuern.

The JDY-08 Bluetooth Transceiver Module supports

  • WeChat pass
  • Air Sync
  • APP transparent transmission mode (also iOS and Android compatible)
  • iBeacon
  • Host and Slave Mode
  • RTC Functions

 

The JDY-08 Transceiver Modul supports also

  • PWM
  • GPIO
  • I2C
  • UART

Interfaces.

The JDY-08 is a low power consumption Transceiver Module its based on BLE Standard (Bluetooth Low Energy).

The Interfaces and Functions are controlled thru simple AT Commands.

JDY-08 Bluetooth 4.0 Module Features:

  • 3.3V Working Voltage
  • Ultra-low standby power consumption 400uA ~ 800uA
  • Ultra-long connection distance up to 100 ft / 60 m
  • Fast reaction speed 0.4 seconds
  • For Apple, Android
  • Receive no byte limit, up to 6K Bytes / sec.
  • I2C Interface
  • UART Interface
  • PWM
  • GPIO
  • small form factor 19.6 * 14.9 mm

 

Zusätzliche Informationen

Datenblatt

JDY-08-Bluetooth-Module-Datasheet.pdf (254 Downloads)

Das könnte dir auch gefallen …

Anmelden