2 Stk. pcs. CM6800 Champion Low Start-Up Current PFC PWM Controller Combo DIP16

2,69 

2 Stk. pcs. CM6800 Champion Low Start-Up Current PFC PWM Controller Combo DIP16

Lieferzeit: sofort

10 vorrätig

EAN: N/A Artikelnummer: 283564956582 Kategorie: Schlagwörter: , , , , , ,

Beschreibung

2 Stk. pcs. CM6800 Low Start-Up Current PFC PWM Controller Combo DIP16 IC

Champion CM6800 PFC PWM Controller IC DIP16 © androegg

our professional IC Shipment method © androegg

2 Stück Champion CM6800 PFC (Power Factor Corrected) / PWM (PulsWeitenModulation) Controller IC im DIP16 Gehäuse.

 

Unser Versand erfolgt

  •  SCHNELL, als Briefsendung (nicht als Warensendung)
  • ESD geschützt, eingeschweißt in ESD Folie
  • geschützte Pins, durch Schaumstoff Polsterung
  • im Versandkarton, nicht lose im Luftpolsterkuvert

 

2 pcs. Champion CM6800 PFC (Power Factor Corrected) / PWM (Pulse Width Modulation) Controller IC DIP16 package.

Our shipment is

  •  FAST, registered mail(not Economy Shipping)
  • ESD protected, shrink wrapped in ESD Foil
  • PROTECTED Pins, foam cushioning
  • SAVE in cardboard box, not unprotected in a air cushion enveleope

CM6800 PFC PWM Controller IC Features:

The CM6800 is a controller for power factor corrected, switched mode power suppliers. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully compiles with IEC-1000-3-2 specifications. Intended as a BiCMOS version of the industry-standard ML4824, CM6800 includes circuits for the implementation of leading edge, average current, “boost” type power factor correction and a trailing edge, pulse width modulator (PWM). Gate-driver with 1A capabilities minimizes the need for external driver circuits. Low power requirements improve efficiency and reduce component costs. An over-voltage comparator shuts down the PFC section in the event of a sudden decrease in load. The PFC section also includes peak current limiting and input voltage brownout protection. The PWM section can be operated in current or voltage mode, at up to 250kHz, and includes an accurate 50% duty cycle limit to prevent transformer saturation. CM6800 includes an additional folded-back current limit for PWM section to provide short circuit protection function.

  • Pin to pin compatible with ML4800 and FAN4800
  • Additional folded-back current limit for PWM section.
  • 23V Bi-CMOS process
  • VIN OK turn on PWM at 2.5V instead of 1.5V
  • Internally synchronized leading edge PFC and trailing edge PWM in one IC
  • Slew rate enhanced transconductance error amplifier for ultra-fast PFC response
  • Low start-up current (100 µA typ.)
  • Low operating current (3.0mA typ.)
  • Low total harmonic distortion, high PF
  • Reduces ripple current in the storage capacitor between the PFC and PWM sections
  • Average current, continuous or discontinuous boost leading edge PFC
  • VCC OVP Comparator, Low Power Detect Comparator
  • PWM configurable for current mode or voltage mode operation
  • Current fed gain modulator for improved noise immunity
  • Brown-out control, over-voltage protection, UVLO, and soft start, and Reference OK

Das könnte dir auch gefallen …